Hydraulic Hose Assemblies Made to Order
Hydraulic systems need hoses that carry fluid under serious pressure, flex with moving parts and keep doing it shift after shift. New Hoses Direct makes up hydraulic hose assemblies to your specification, cutting the hose to length and crimping the end fittings so every assembly arrives ready to fit.
Tell us the hose type, bore, length and fitting ends, or the details from your old assembly, and we will build a like-for-like replacement. Finished assemblies go out with nationwide delivery, wherever your machine is working.
Choosing the Right Hydraulic Hose
Picking a hydraulic hose is about more than matching the bore. Working pressure comes first: the hose must be rated at or above the highest pressure in the system, surges included. Temperature matters too, both of the fluid and of the surroundings, because heat ages rubber faster than almost anything else.
Next comes the routing: bending a hose tighter than its minimum bend radius strains the reinforcement and shortens its life. Finally, the inner tube must suit the fluid, whether mineral oil, biodegradable oil or a water glycol mix. Give us these details and we will recommend a hose to match.
Plant and Construction
Excavators, loaders, dumpers and cranes depend on hydraulic hose for every boom, bucket and track movement.
We make up replacement assemblies for plant machinery to the original specification, so the machine can get back to work with the minimum of fuss.
Agricultural Machinery
Tractors, loaders, balers and trailers all use hydraulic hose, often working outdoors in mud, dust and cold weather.
We supply hose assemblies with the right fittings for farm equipment and implements. Our agricultural hoses page covers the wider farm range.
Industrial Machinery
Presses, injection moulding machines, machine tools and lift trucks all rely on hydraulic power to keep running.
Whether you need a single replacement hose or a set of assemblies for a production line, we can build them from your drawings or samples. See our industrial hoses for more.
Marine Deck Equipment
Winches, deck cranes, steering gear and hatch systems need hydraulic hose that copes with salt spray and constant movement.
We make up assemblies for deck machinery and can advise on covers and fittings suited to life at sea. Visit our marine hoses page to find out more.
MSHA Hose for Mining
Hose used underground often has to meet flame resistance requirements, and MSHA acceptance is one of the recognised marks for this.
If your work calls for it, ask us about MSHA-accepted hose for mining applications and we will advise on the options for your job.
Fittings and Adaptors
A hydraulic assembly is only as good as its ends. Fittings come in many thread forms, such as BSP, JIC, ORFS and metric, and the right match is key to a leak-free joint.
Tell us what you are connecting to and we will advise on fittings, adaptors and hose protection such as spiral guard.
Replacing Worn Hydraulic Hose Assemblies
Hydraulic hoses do not last forever. Heat, abrasion, flexing and age all take their toll, and an assembly that looked fine last month can start weeping at the crimp or rubbing through its cover.
When it is time for a replacement, we match the hose type, pressure rating, length and fitting orientation so the new assembly goes in exactly as the old one came out. If the original failed early, we can suggest a tougher hose or a protective guard.
Planned replacement usually costs far less than a breakdown. Send us the details of the hoses you need and we will make them up and send them out with prompt delivery.
Hydraulic Hose Specialists
Practical advice and well-made assemblies for every kind of hydraulic system.
From a single 1 wire hose for a small power pack to a set of multi spiral assemblies for heavy plant, every job gets the same care. We check the specification, build the assembly and make sure the fittings are the correct type and orientation.
Not sure of the exact specification? Our team can work from the markings printed on the old hose or the details of the machine to identify a suitable replacement.
Whether you run a plant fleet, a farm, a factory or a vessel, New Hoses Direct can help. Contact us today and we will find the right hydraulic hose for you, delivered wherever you are in the UK.
Industrial Hoses
Hoses for factories, workshops and process plants, carrying air, water, oil, chemicals and more. Built for demanding daily use and supplied with fittings to suit your equipment.
Cleaning Hoses
Hoses for washdown, pressure washing and site cleaning that stay flexible and resist wear. We can supply the hose, fittings and couplings to complete your cleaning setup.
Marine Hoses
Hoses for boats, ships and harbour work, including fuel, water, bilge and exhaust lines. Chosen to resist salt water, weather and the constant movement of a working vessel.